Dynex DX-DPF7-10-MX 16

16 Using your digital picture frame

5Press MODE/ENTER again in BROWSE mode to display

THUMBNAIL mode. Thumbnail-sized pictures appear on

the screen in a table.

6Press , , , or to highlight a thumbnail.

7Press MODE/ENTER to display the picture.

8To switch to a different memory device, press EXIT twice

from SLIDESHOW, BROWSE or THUMBNAIL modes. The

memory source screen opens up, and you may select a

memory device from which to view pictures.

Note: If a memory card or USB device has not been inserted,

that device will be gray and will not be able to be selected.

To copy pictures to your frame:

1Insert a memory card or USB device into your frame. A

slideshow a pictures from the inserted media begins.

2Locate the picture you wish to copy in SLIDESHOW or

BROWSE mode, then press COPY/DEL. A message asks you

if you want to copy the picture.

3Press or to highlight YES, then press MODE/ENTER

to confirm.

Notes:

You can rotate pictures clockwise by pressing ROTATE

while the picture is on the screen. Rotated pictures will be

stored in their rotated position.

Pictures cannot be copie d from the frame's internal memory to

a memory card or USB device. For that reason, you should not

use your frame as your primary picture storage method.

10-0796 DX_DPF7-10_MAN_ENG_V2.fm Page 16 Thursday, July 29, 2010 7:18 AM