4

Setting up the Web camera

Setting up the Web camera

Installing the drivers

Note: Install the driver first, then connect the Web camera to a USB port on your computer.

Windows Environment

To install the Windows driver:

1Insert the Dynex Installation CD into the CD drive of your computer. The installation program automatically starts.

If the installation program does not start automatically, click Start, Run, type D:\Setup.exe (where “D” is your CD drive), then press Enter. The Install screen opens.

2Click Driver, then follow the on-screen instructions.

3Install “DirectX” from the CD, if necessary.

Note: To remove the Windows driver, click Start, All Programs, Dynex WebCam, then click Uninstall. Follow the on-screen instructions to remove the driver.

Mac Environment

To install the Mac driver:

1Insert the Dynex Installation CD into the CD-ROM drive of your computer, then double click on the CD-ROM drive.

2Click the Dynex Driver OSX 1.0 file folder.

3Click Dynex Driver Install, then follow the on-screen instructions.

Note: This Dynex Web camera is not compatible with iChat, because iChat only supports Apple’s Web cameras or IEEE 1394 Web cameras.