10

DX-DVD2

Installing remote control batteries

To install the remote control battery:

1Open the battery tray.

2If this is the first time you will be using the remote control, remove the plastic insulation sheet that covers the battery.

-OR-

If you are replacing the battery, remove the old battery and insert a new lithium coin cell battery (CR2025) into the battery tray. Make sure that you match the + symbol on the battery with the + symbol on the battery tray.

3Replace the battery tray.

Notes:

•Do not mix batteries of different types.

•Do not mix old and new batteries.

•Remove batteries when the charge is depleted.

•Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.

•If the remote control is not going to be used for an extended period of time, remove the batteries.