
20 |
•Disc
•
Press OK to perform the reset.
4Press (Left) to return to the previous menu.
5 Press SETUP to exit the
Troubleshooting
Check the following guide for the possible causes and solutions for a problem before contacting the nearest service center or dealer for repairs.
14
Symptom | Solution |
|
|
No power | Make sure that the DVD player is plugged in and that the AC power connection is |
| secure. |
|
|
No picture | • Make sure that the connection between the DVD player and the TV is secure. |
| • Make sure that the TV is in good working condition. |
|
|
No sound | • Make sure that the connection between the player and other devices is secure. |
| • Make sure that the TV and amplifier are in good working condition and setup |
| correctly. |
|
|
DVD will not play | • Make sure that the disc is correctly inserted. |
| • Clean the disc. |
|
|
The remote control does not | • Remove obstacles between the remote control and the player. |
work | • Aim the remote control at the sensor on the front panel of the player. |
| • Check the battery and replace it if necessary. |
|
|
Picture is distorted | • Check the disc for dirt and scratches. Clean or replace the disc. |
| • Unplug the player, wait ten seconds, then plug it back in and turn it on. |
|
|
The control buttons on the | • Power surges or other electrical phenomena may have disabled the buttons. |
player do not work | • Unplug the player, wait ten seconds, then plug it back in and turn it on. |
|
|