Dynex DX-ESATL Installing the adapter, System requirements, Installing the hardware, To install the ExpressCard adapter:

Installing the adapter 5

The following picture can help you to recognize both standard SATA and eSATA cables. If you do not have an eSATA cable, you must purchase one from your local dealer.

	Use this connector
SATA type A cable (has	eSATA cable (no
an L-shaped key)	L-shaped key)

System requirements

•ExpressCard-enabled system with an available Express Card 34 mm or 54 mm slot

•Windows XP, Windows Vista, or Mac 10.4.x or higher

Installing the adapter

Installing the hardware

To install the ExpressCard adapter:

•Slide the ExpressCard adapter into the Express Card slot of your notebook computer until it is firmly seated in the slot. (Refer to the Express Card slot installation instructions in your notebook computer’s user guide)