26 | Specifications |
Storing discs
After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.
Cleaning discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.
Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or
Servicing
Do not try to repair your TV/DVD combo yourself. There are no
Specifications
Design and specifications are subject to change without notice. Dimensions and weight are approximate.
| Model | 22” |
Picture/sound system | NTSC, ATSC, Clear QAM |
|
|
| Audio output | ≥ 3W+3W |
External input ports | AV input, PC input, |
| input, YPbPr input, Antenna input, HDMI input, |
| AUDIO in, headphone, USB for Service |
Power requirements | 120 V~60 Hz |
Power consumption | 60 W |
|
|
| Temperature | Working: +41°F~+95°F (+5°C~+35°C) |
| Storage: +5°F~113°F |
| Humidity | Working: 20%~80% |
| Storage: 5%~90% |
|
|
| Dimensions | 21.3 × 7.5 × 16.4 inches |
| (54.0 × 19.0 × 41.7 cm) |
|
|
| Weight | 12.1 lbs. (5.5 kg) |
|
|
| Accessories | Remote control |
| Batteries (AA x 2) |
| Component cable |
| User Guide |
| Quick Start Guide |
|
|
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced technician for help.FCC warning
Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian