Manuals / Brands / Computer Equipment / Network Card / Dynex / Computer Equipment / Network Card

Dynex DX-PCIGB Troubleshooting, Verify adapter installation, Using Wake-On-LAN, To verify that your adapter is correctly installed:, Hardware, Device Manager

1 20

Download 20 pages, 605.15 Kb

8	Troubleshooting

Using Wake-On-LAN

Your DX-PCIGB features Wake On LAN (WOL).This feature lets a remote station "wake" your computer when it is in Standby or Hibernate mode.

Note: The WOL function is system dependent. In addition to the following instructions, you may need to download WOL software from Intel or another manufacturer's Web site. See your computer's user guide for specific BIOS settings.

Troubleshooting

If you are having problems with your network, check the following topics.

Verify adapter installation

If your adapter is not installed correctly, including the network system software or device drivers, your network will not function correctly.

To verify that your adapter is correctly installed:

1Click Start, then right-click My Computer and click Properties. The System Properties window opens.

2Click the Hardware tab, then click Device Manager. The Device Manager window opens.

Contents

USER GUIDE Contents Introduction Features •Integrated Ethernet MAC (physical chip and transceiver in one chip) •PCI local bus single-chipEthernet controller •One STP/UTP connector •Supports: Important safety instructions •Do not drop or hit your adapter •Do not insert metal objects, such as coins or paper clips, into your adapter Package contents •DX-PCIGBgigabit PCI adapter •CD containing drivers and manuals •Low-profilebracket This 8Reinstall your computer’s case cover 9Plug in the power cord and other cables, then turn on your computer Installing the adapter driver To install the adapter driver: Cancel Install Driver Using Wake-On-LAN Troubleshooting Verify adapter installation To verify that your adapter is correctly installed: Hardware Device Manager Verify cable connections To verify cable connections: 3Examine the network cables and make sure that they have not been damaged Understanding indicators •A steady green light of 100M indicates a good connection at 100 Mbps •A steady green light of 1000M indicates a good connection at 1000 Mbps Pinging your adapter To ping the adapter: cmd Specifications Normal Environmental and Physical Legal notices FCC Part •Reorient or relocate the receiving antenna •Increase the separation between the equipment and receiver Canada ICES-003statement Page One-yearlimited warranty How long does the coverage last What does this warranty cover How to obtain warranty service Where is the warranty valid What does the warranty not cover