
Installing the adapter | 7 |
Installing the adapter driver
Note: For Mac OS X 10.4 or higher users, your adapter is Plug
&Play capable in Mac OS X 10.4 or higher, so no driver installation is needed. For Windows 7, Windows Vista, Windows XP, and WIndows 2000 users: Follow the steps below to install the driver.
To install the adapter driver:
1If the Found New Hardware Wizard opens when you start your computer, click Cancel.
Note: This may not appear on Windows 7 or Windows Vista.
2Insert the
3Click Install Driver to start the installation wizard.
4Click Next, then click Finish when the wizard is complete.
5 Click EXIT to close the Dynex Gigabit PCI Adapter window.