Dynex DX-PD510 owner manual Specifications, Rechargeable Battery Installation and Use

O. Specifications

Compatible DISC: DVD/CD/MP3

Signal system: DVD--NTSC/PAL + Monitor--NTSC

Panel size: 5 inch

Frequency response: 20 Hz to 20 kHz

Video output: 1 Vp-p/75 Ohm, unbalanced

Audio output: 1.4Vrms/10kOhm

Audio S/N: Better than 60 dB

Dynamic range : Better than 85 dB

Laser: Semiconductor Laser, Wave Length: 650 nm/795 nm

Power source: DC 9V

Power consumption: 12 W

Operating temperature: 5~35°C

Weight : 0.67 kg

Dimensions (W x D x H): 8.07 X 5.98 X1.57inches 205 x 152 x 40mm

Battery Type: NiMh

P. Rechargeable Battery Installation and Use

The player utilizes a set of long-life NiMh batteries for a portable power supply. NiMh batteries feature high storage capacity and low level of degradation. This means the NiMh batteries do not have “Memory Ef- fect” and thus can be recharged safely regardless of whether the bat- tery is fully or only partially discharged. Please fully charge the battery prior to first use.

NOTE: When the DVD player is used with the battery as a power source, ensure that the battery has been charged for at least eight hours prior to connecting it to the DVD player.

If you plan not to use the battery for an extended period of time (one week or longer), we recommend that you first fully charge the battery and store it away properly. For longer periods of storage, please re- charge the battery at least once every two months to maintain the battery in optimum condition. Under no circumstances short the bat- tery terminals, store the battery in a metal container, or leave the bat- tery in a humid or damp environment. Ideally, store the battery in an

27

PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com