12-sheet Crosscut Paper Shredder 7
Using the shredder
LED status indicators:
To use the shredder:
Caution:
•Do not overfeed the shredder: Shredding beyond the specified sheet capacity can
result in extensive damage to the shredder. Overfeeding will strain the machine and
quickly wear and break the cutting blades and internal components.
•Overheating with extended use: In the event that the shredder has shred
continuously beyond the maximum running time and overheats, the unit will
automatically shut off. If this happens, switch the shredder Off for 30 minutes or
longer before resuming normal operation.
1To begin shredding, locate the switch on the shredder (on the top, at the right rear corner) and
select the “Auto” mode. The Green Power LED indicates the shredder is On and ready to use.
Position Setting Indicates
| AUTO/ON This setting allows the shredder to be automatically started by inserting paper into the
shred opening. Always feed the paper in as straight as possible. When the paper has
passed through, the shredder will automatically stop.
O OFF This setting turns off all features of the shredder. For safety reasons, we recommend that
you leave the shredder in the "Off" position whenever the shredder is unattended or not
in use.
RREV
(Reverse)
In the unlikely event of a paper jam, the reverse setting can be used to help clear the
cutters of paper that has not passed through. Never attempt to clear a jam by using the
reverse function until you have emptied the wastebasket.
READY The green LED light indicates the shredder is “On” and ready for use.
Power On
(green light)
Paper Overload
(red light)
Overheat
(red light) Door Open
(red light)
DX-PS12CC_12-0052 MAN_V1.fm Page 7 Friday, February 3, 2012 7:59 AM