fRoNt RIGGING
eLevAtING LeGReSt—detAcHABLe, SwINGAwAy
WARNING: The footplates' lowest point should be no closer to the ground than 2 1/2 inches, to permit proper clearance.
WARNING: Do not stand on the footplates; this could cause the wheelchair to tip.
Remove elevating legrest
1.To release lock, pull swingaway release lever forward, toward front of wheelchair. Legrest will swing outward.
2.To remove, lift legrest straight up off wheelchair hinge pins.
Attach elevating legrest
1.Set legrest on wheelchair (so that legrest hinge plates engage wheelchair hinge pins).
2.Swing legrest inward.
hinge plate
swingaway release lever
remove elevating legrest
3.Ensure that legrest is locked in place and that swingaway release lever is locked in a rearward position, toward back of wheelchair.
WARNING: Ensure that legrests are locked in place before occupying or operating wheelchair.
17 |
