For attendant: curb ascent facing forward

1.Ensure that the hand grips are securely fastened and do not turn or slip.

2.Stand behind the Transport Chair, holding the hand grips, facing the curb.

3.Advise the user that you will be tilting backward and remind the user to lean back.

4.Tilt the Transport Chair backward to its balance point and move forward until the front casters pass over the top of the curb.

5.Lower the front casters SLOWLY to the curb while you rotate the Transport Chair forward by the push handles until the rear casters roll up and over the curb.

6.Ensure that the Transport Chair has completely cleared the curb and can not roll backward.

For attendant: curb ascent facing backward

1.Ensure that the hand grips are securely fastened and do not turn or slip.

2.Stand behind the Transport Chair, holding the hand grips, facing away from the curb, with the rear casters against the curb.

3.Advise the user that you will be tilting backward and remind the user to lean back.

4.Tilt the Transport Chair back to its balance point and lift up by the push handles while pulling the Transport Chair up and over the curb. DO NOT lower the front casters down until the Transport Chair is back far enough to clear the curb.

For attendant: curb descent

1.Ensure that the hand grips are securely fastened and do not turn or slip.

2.Stand behind the Transport Chair, holding the hand grips, with your back to the curb.

3.Look over your shoulder and step down carefully.

4.Hold the hand grips tightly and pull the Transport Chair until the rear casters reach the curb edge.

5.Slowly roll the rear casters down onto the lower level.

6.After the wheels are safely on the lower level, advise the

user that you will be tilting backward and remind the user to lean back.

7.Tilt the Transport Chair back to its balance point; this will lift the front casters off the curb. Take several small steps backward until the front casters have cleared the curb.

8.Turn the Transport Chair around, place one foot on the tipping lever, and gradually lower the front casters to the ground.

EJ78X-1-INS-LAB-RevC13

9

Page 8 Page 10
Page 9
Image 9
E&J EJ79X-1, EJ78X-1 manual For attendant curb ascent facing forward, For attendant curb ascent facing backward
Page 8 Page 10

EJ79X-1, EJ78X-1 specifications

The E&J EJ78X-1 is a cutting-edge product that embodies modern technology and innovation, engineered to meet the demands of a diverse range of applications. This model stands out in the E&J lineup due to its robust performance and user-centric features, making it a preferred choice among professionals and enthusiasts alike.

One of the standout features of the EJ78X-1 is its powerful performance capabilities. It is equipped with a high-efficiency motor that ensures optimal power delivery while maintaining energy efficiency. This motor not only enhances the product's durability but also contributes to a longer lifespan, allowing users to fully leverage its capabilities without the frequent need for replacements or upgrades.

The EJ78X-1 also incorporates advanced smart technology, allowing for seamless integration with various systems. This feature enables users to monitor performance metrics in real-time, facilitating data-driven decision-making. With user-friendly software, the monitoring process is straightforward, providing valuable insights into operational efficiency and potential areas for improvement.

Another remarkable characteristic of the EJ78X-1 is its ergonomic design. Built with user comfort in mind, it features an intuitive control panel that makes operation effortless, even for users with minimal technical expertise. The design also considers portability, ensuring it can be easily transported and used in various settings without compromising performance.

In addition to its impressive performance and design features, the EJ78X-1 places a strong emphasis on safety. It is equipped with multiple safety mechanisms that protect users and the machine itself, significantly reducing the risk of accidents during operation. These safeguards have been rigorously tested and adhere to industry standards, providing users with peace of mind.

Furthermore, the E&J EJ78X-1 is built using high-grade materials, ensuring that it can withstand the rigors of daily use in challenging environments. Its resilience against wear and tear is a testament to E&J's commitment to quality and excellence.

Overall, the E&J EJ78X-1 represents a harmonious blend of power, efficiency, and safety. Its innovative features, combined with user-centric design and robust performance, make it an exceptional choice for those seeking reliability and excellence in technology. Whether used in industrial applications or by hobbyists, the EJ78X-1 is poised to deliver consistent, high-quality results for years to come.
Top Page Image Contents