Front Rigging
Footrest—detachable, swingaway
WARNING: The footplates' lowest point should be no closer to the ground than
WARNING: Do not stand on the footplates; this could cause the wheelchair to tip.
Remove footrest
1.To release lock, pull swingaway release lever forward, toward front of wheelchair. Footrest will swing outward.
2.To remove, lift footrest straight up off wheel- chair hinge pins.
Attach footrest
1.Set footrest on wheel- chair (so that footrest hinge plates engage wheelchair hinge pins).
2.Swing footrest inward.
hinge plate
swingaway release lever
remove footrest
(left shown)
3.Ensure that swingaway release lever is locked in a rearward position, to- ward back of wheelchair.
WARNING: Ensure that footrests are locked in place before occupying or operating wheelchair.
02002178 Revision B, March 2006 • Metro IC4 Owner’s Manual | 17 |
