Eagle Electronics 640c, Mapping GPS Receiver manual Find Addresses

In search results, the distance and bearing to the selected item will be calculated from the current position. In the case of a cursor search, the search results show distance and bearing from the cur- sor, but an individual waypoint's information screen shows distance and bearing from the current (or last known) position.

Find Addresses

1.From the Map Page, press MENU↓ to FIND ADDRESSENT.

2.Press ENT to search in the Address field.

3.To enter an address number, press ↑ or ↓ to change the first number, then press → to move the cursor to the next number and re- peat until the number is correct, then press ENT.

Find Address Menu (left) and Find By Name at right.

4.To enter a street name, press ↓ to STREETENT. You can spell out the name in the street selection box. Press ↑ or ↓ to change the first letter, then press → to move the cursor to the next letter and repeat until the name is correct, then press ENTENT.

5.To enter a city name, press ↓ to CITYENT. You will be asked if you want to find addresses only within a particular city. This option is de- signed so you can limit an address search to a single city if necessary (see the following note).

If you select yes, there are two options: A. You can spell out the city name in the top selection box. Press ↑ or ↓ to change the first letter, then press → to move the cursor to the next letter and repeat until the name

102