Eagle Electronics 640c manual To edit waypoint symbol

highlighted in the list, press ENTENT to access waypoint information screen.

2.Use ↓ to select EDIT WAYPOINT, then press ENTENT. Press ↑ or ↓ to change the first character, then press → to the next character and re- peat until the name is correct. Press ENT. To get back to the main page display, press EXIT repeatedly.

Waypoint Symbol

To edit waypoint symbol:

1.Press WPT↑ to MY WAYPOINTSENT↓ to nameENT. Select waypoint from the list then press ENTENT. Use ↓ to select EDIT WAYPOINT. PressENT↓ to CHOOSE SYMBOLENT.

2.Select the desired symbol and press ENT. To get back to the main page display, press EXIT repeatedly.

Waypoint Position

To edit waypoint position:

1.Press WPT↑ to MY WAYPOINTSENT↓ to nameENT. Select the desired waypoint and press ENTENT. Press ↓ to EDIT WAYPOINTENT.

2.Latitude: press → to LATITUDEENT. Press ↑ or ↓ to change the first character, then press → to the next character and repeat until the lati- tude is correct. Press EXIT.

3.Longitude: press ↓ to LONGITUDEENT. Press ↑ or ↓ to change the first character, then press → to the next character and repeat until the lon- gitude is correct. Press EXIT. To return to the main page display press EXIT repeatedly.

Selecting a Waypoint

To select a waypoint on the map center the cursor crosshairs on the waypoint. A red border will appear around the waypoint.

Set a Waypoint by Average Position

A waypoint set by average position is created after several position readings have been averaged. This boosts waypoint position accuracy by helping to eliminate errors caused by atmospheric conditions and other factors.

1.Press WPT↑ to MY WAYPOINTS→ to NEWENT.

2.Press ↓ or ↑ to AVERAGE POSITIONENTpress → to CREATEENT.

3.Wait while the unit takes points to average for the position. The greater the number of points, the greater the accuracy. When the desired number of points accumulates, press ENT to create and save the waypoint.

66