4.The Edit Waypoint menu appears. Press EXIT repeatedly to get back to the main page display.
Set a Waypoint by Projecting a Position
This feature creates a waypoint at a location a specific distance and bearing from a reference position. The reference position can be a way- point, map feature or Point of Interest.
1.Press WPT↑ to MY WAYPOINTS→ to NEWENT.
2.Press ↓ to PROJECTED POSITIONENT→ to CREATEENT.
3.Press CHOOSE REFERENCEENT. Use ↑ and ↓ to select a waypoint, map
feature or Point of Interest. When a selection has been made press ENT. Press →, ↑ or ↓ to choose a subcategory, then press ENT. Highlight NAMEENT. Spell out the name of the desired reference point in the Find By Name box or press ENT to the find the point in the list below. After you have selected a point, press ENT. That will launch the waypoint in- formation window. Highlight SET REFERENCE and press ENT.
4.Press ← ↓ to DISTANCEENT. Press ↑ or ↓ to change the first character, then press → to the next character and repeat until the distance is cor- rect. Press ENT.
5.Press ↓ to BEARINGENT. Press ↑ or ↓ to change the first character, then press → to the next character and repeat until the bearing is cor- rect. Press ENT.
6.Press ↑ to PROJECTENT. The Edit Waypoint menu appears. Press EXITEXIT to get back to the main page display or press EXITENT to navigate to the new waypoint.
67
