SAFETY INSTRUCTIONS
1)Always wear protective goggles or safety glasses, hearing protection, protective gloves and footwear.
2)Air tools can create dust when drilling, grinding, sanding or cutting. This dust can con- tain substances known to cause cancer, birth defect, etc. Also wear proper breathing protection.
3)Do not wear loose clothing or jewelry, and ensure long hair is protected with a proper cover.
4)Do not exceed the maximum operating pressure of this tool or any component in the air delivery system.
5)Do not depress the trigger when connecting this tool to the air supply system. Always disconnect the tool from the air supply system when changing attachments.
6)Only use attachments specifically designed for use with air tools. Hand tool sockets can shatter and cause serious injury. Do not use worn or damaged attachments. Make sure attachments are securely attached to the air tool.
7)Do not point the air tool at yourself or any other person.
8)Never use Oxygen or combustible gases to operate this tool. Use only lubricated com- pressed air regulated to the recommended operating pressure for this tool.
9)Disconnect this tool from its air supply before attempting to install or change attach- ments or before attempting any service. Also disconnect the air tool from the com- pressed air system when not in use.
10)Excessive use of this tool can cause injury due to vibration and fatigue. Do not use this tool in awkward positions, and avoid repetitive work motions. When feeling discomfort, numbness, fatigue, tingling or pain stop work immediately and seek medical treatment and advice.
11)Inspect air hoses, and discard if in worn, weak or damaged condition. Make sure all air connections are tight and secure.
12)Keep hands away from moving parts
13)Consider working conditions and environment. Do not operate this tool around hazard- ous gases or flammable gases. Keep your work area neat and tidy and make sure the work area is well lit.
14)Always use clamping devices to hold all work securely in place, never use hands or other body parts for holding work. Both hands must be used to operate this air tool, enabling control and safety.
15)Do not use this air tool if intoxicated, if you are using drugs or medication causing drowsiness or if you are tired.
16)Do not leave this air tool unattended, and disconnect from the air delivery system when not in use. Children must be supervised in the proximity of any air tool or work area.
17)Follow air supply manufacturer’s recommendation for connection of regulators, filters and other accessories. Do not install quick couplers directly on air tool, it puts unneces- sary strain on the air inlet threads, instead install a short length of air hose to the tool.
Do not over tighten fitting connecting to the air tool; this could cause the housing to crack. Use Teflon tape or pipe sealant carefully to prevent excess from entering the air tool.
Wear hearing protection. |
Wear eye protection. |
Wear respiratory protection. |
Read the instruction manual
