PARTS LIST

 

 

 

 

 

Fig.1

 

 

 

 

No.Description

Part Code

No.Description

Part Code

1.

Needle and Fluid Tip Tool

V0018

7. Fluid Needle 2.0mm

V0006

2.

Air Cap Ring

V0001

8.

Lip Seal - Fluid Needle

V0007

3.

Air Cap

V0002

9.

Paint Flow Adjuster

V0011

4.

Spray Direction Plate

V0003

10. Paint Container Seal

L0682

5.

Fluid Tip 2.0mm

V0004

11. Pick-up Tube

V0012

6.

Fluid Tip O-Ring

V0005

12. Paint Container

V0014

PARTS LIST HV3500 Fig.2

 

 

 

 

No.Description

Part Code

 

 

 

13. Hose

L1064

 

 

 

14. Filter

L0290

 

 

 

PARTS LIST HV2900/3900 Fig.3

 

 

 

 

No.Description

Part Code

 

 

 

13. Hose

L0896

 

 

 

14. Filter

L0290

 

 

 

SAFETY OPERATING INSTRUCTIONS

PLEASE READ BEFORE USE

•Never under any circumstances aim the Spray Gun at another person or animal. In the event of injury occurring seek expert medical advice immediately.

•The Spray Gun must only be used with paints and solvents that have a flash point suitable for spraying. If in doubt, consult the paint or solvent manufacturer’s data.

•Always ensure there is adequate ventilation when spraying.

•NEVER spray near a naked flame, including appliance pilot light.

•NEVER smoke whilst spraying.

•NEVER allow children to operate or play with the Spray Gun.

•Always read the solvent manufacturer’s instructions before use.

•Always disconnect unit from mains supply when filling the paint container.

•Always wear a suitable protective mask when spraying. We would also recommend the use of gloves, goggles and overalls.

•After each use, thoroughly clean the Spray Gun.

•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

•Use only genuine manufacturer replacement parts.

•Always disconnect the Spray Station from the mains supply before cleaning the appliance.

•Warning: The use of any accessory or attachment, other than those recommended in this instruction manual, may present a risk of personal injury.

•Use the Spray Gun for the job it was designed for only. Mis-use of the Spray Gun will invalidate the guarantee.

•Wear ear protection.

WARNING: The substances used with this Spray Gun (paints, solvents, etc.) may contain dangerous, harmful, explosive or corrosive materials. ALWAYS COMPLY WITH THE SAFETY INSTRUCTIONS ISSUED WITH THIS PRODUCT AND THE MATERIAL BEING USED.

INTRODUCTION

The concept

A motor feeds out a high volume of air (HV) and enables products to be sprayed at a low pressure (LP). The Hose feeds the air produced by the motor to the Spray Gun. The solution is released from the Fluid Tip of the Spray Gun at a very low pressure and is enclosed in a high volume of air.

The powerful motor can spray a wide range of solutions with or without dilution. However, there will always be some which will not be suitable for the Spray Gun. Good quality paint contains a high percentage of solids which make the dilution easier. The users must keep in mind that low temperatures make the paint thicker, that’s why we recommend spraying with the Spray Gun at a 15°C minimum temperature.

3

Page 2 Page 4
Page 3
Image 3
Earlex HV3900, HV3500, HV2900 Parts List, Safety Operating Instructions Please Read Before USE, Introduction, Concept
Page 2 Page 4

HV3900, HV3500, HV2900 specifications

The Earlex HV2900, HV3500, and HV3900 are a range of high-performance spray painting systems designed for professional painters, DIY enthusiasts, and hobbyists alike. Each model offers unique features, technologies, and characteristics, catering to a variety of spraying needs and project requirements.

Starting with the HV2900, this model is lightweight and compact, making it an ideal choice for small to medium projects. The HV2900 uses a high-velocity air (HV) system, which atomizes paint effectively, allowing for a smooth and even finish. This system is particularly suitable for painting furniture, cabinets, and detailed woodwork. With a 650-watt motor, it provides ample power for a variety of coatings, including water-based and oil-based paints. The adjustable spray pattern and fluid control allow users to customize their application, ensuring maximum versatility.

Moving on to the HV3500, this model offers improved performance characteristics with a more powerful 900-watt motor. The enhanced airflow allows for quicker project completion and the capability to handle larger areas with ease. The HV3500 features a larger fluid reservoir, accommodating extended spraying sessions without frequent refills. This model is perfect for both interior and exterior applications, suitable for projects like fences, decks, and garage doors. The dual-stage turbine technology ensures that the paint is atomized more efficiently, resulting in a fine mist that adheres well to surfaces.

Finally, the HV3900 stands out with its advanced features and increased power output at 1300 watts. Designed for professional use, the HV3900 offers a combination of speed and precision. It includes a three-stage turbine for enhanced control and better atomization, making it suitable for a wide range of coatings, from thick latex paints to stain and varnish. The HV3900 also boasts an oversized pressure gauge, ensuring users can monitor and adjust settings for optimal results. Its ergonomic design and lightweight construction facilitate ease of use, allowing for extended operation without fatigue.

All three models in the Earlex HV range are designed with user-friendly features, including easy cleaning and maintenance, which helps to extend the life of the equipment. The range is well-regarded for its reliability, performance, and consistency, making it a go-to choice for those looking to achieve professional-quality finishes with ease. Whether you choose the HV2900 for smaller tasks or the HV3900 for larger projects, you can be assured of a dependable and effective spraying solution.
Top Page Image Contents