Earthquake Sound Cinenova 7 Cinénova Grande 5/7 Number of Channels, Power Rating Per Channel

Specifications

Earthquake Sound

MODEL	Cinénova Grande 5/7	Cinénova 7
Number of Channels	5-channels / 7-channels	7-channels
Power Rating Per Channel	1 (8-ohm load), all channels driven: 360 Watts	(8-ohm load) Rated:150 WRMS	Measured:170
	2 (4-ohm load), all channels driven: 610 Watts	2 (4-ohm load) Rated:250 WRMS	Measured:300
	2 (2-ohm load), all channels driven: 810 Watts	2 (2-ohm load) Rated:300 WRMS	Measured:350
Output Load Impedance	Safe with all loads from 2-Ohm to 16-Ohm	Safe with all loads from 4-Ohm to 16-Ohm
Input Impedance	- RCA: 28-kOhms	- RCA: 28-kOhms
	- XLR: 48-kOhms	- XLR: 48-kOhms
Input Sensitivity	- RCA: 1.6V	See table pg. 13, item 7
	- XLR: 2.4V
Voltage Gain (Av)	42V Gain Relative to 1 watt	42V Gain Relative to 1 watt
Frequency Response	up to 50kHz ±0.1dB	up to 30kHz ±0.1dB
Crossover Filter (low-pass/high-	Variable Selector from 20Hz - 5kHz with a slope of 12dB/Octave	N/A
pass)
Total Harmonic Distortion + Noise	0.003% at 1 watt	0.003% at 1 watt
Signal to Noise Ratio (A-Weighted)	Greater than -121 dB	Greater than -121 dB
Cross Talk / Channel Seperation	Greater than -110 dB from 17Hz to 40kHz	Greater than -110 dB from 17Hz to 40kHz
Slew Rate	55V/microsecond	60V/microsecond
Damping Factor	1600 at 8-Ohm, 800 at 4-Ohm, 400 at 2-Ohm	600 at 8-Ohm, 300 at 4-Ohm
DC Output Offset	Less than 0.004V	0.004
Power Requirement	120 VAC/240 VAC Factory Pre-set	120 VAC/240 VAC Factory Pre-set
Chassis Dimensions (H x W x D)	9 1/4” x 18” x 21” (235mm)x(457mm)x(533mm)	6 7/8” x 17” x 16 1/4” (175mm)x(432mm)x(413mm)
Net Weight	Grande-5: 110lbs / 49.9Kg Grande-7: 122lbs / 55.3Kg	80lbs / 36.3Kg
Shipping Weight	Grande-5: 134lbs / 60.8Kg Grande-7: 148lbs / 67.1Kg	99lbs / 45Kg

1RMS power, measured at 1% THD and 1kHz input frequency

2Adequate ventilation may be required and 240VAC/20 Ampere circuit is recommended

Depending on listening habits and ambient temperatures, 4-ohm and 2-ohm uses might require additional cooling

14