Example Minimum Sealed Designs (8,10,12 & 15" Models)
The SWS 6.5 woofer is designed to replace any stock / factory installed 6.5" driver. It brings bass virtually anywhere in a car: in front doors, rear doors, dash board, center console, under seats, rear decks, and in any space less than 2" deep.
Recommended Sealed Internal Volume (8,10,12 & 15" Models)
Minimum: | 0.19cu.ft. (5.44Ltr) | |
Maximum: | 0.60cu.ft. (16.99Ltr) | |
|
|
|
Minimum: | 0.38cu.ft. (10.76Ltr) | |
Maximum: | 0.75cu.ft. (21.23Ltr) | |
|
|
|
Minimum: | 0.56cu.ft. (15.85Ltr) | |
Maximum: | 1.25cu.ft. (35.39Ltr) | |
|
|
|
Minimum: | 1.20cu.ft. (33.98Ltr) | |
Maximum: | 2.5cu.ft. (70.79Ltr) | |
|
|
|
Our Examples and Reccomendations Are Calculated Assuming That 3/4" MDF Is Being Used
3/4"
MDF
In some cases when the enclosure will be placed with
the sub facing down or the sub butted up against the back of seat. You will need to either add a grille or use 1" strips of your MDF and place as shown above. This will create an excursion cushion so that it doesn't rub or get damaged.
1" - 1.5" Depending On The Woofer
One Subwoofer | Two Subwoofers |
SWS-8/8Xi Minimum Sealed Example
External Dimensions: 11" x
Internal Dimensions: 10" x 9" x
Internal Volume: 0.19cu.ft. (5.44Ltr.)
SWS-10X Minimum Sealed Example
External Dimensions: 12" x
Internal Dimensions: 12" x 16" x 4"
Internal Volume: 0.38cu.ft. (10.76Ltr.)
SWS-12X Minimum Sealed Example
External Dimensions: 15" x
Internal Dimensions:
Internal Volume: 0.56cu.ft. (15.85Ltr.)
SWS-15X Minimum Sealed Example
External Dimensions:
Internal Dimensions: 16" x 20" x 6-1/2"
Internal Volume: 1.20cu.ft. (33.98Ltr.)
5"
8"
11"
12"
15"
SWS subwoofers will handle crazy amounts of power in any of the recommended enclosures, minimum or maximum. The compact enclosures are best for use in
8 | All Specifications Are Subject To Change Without Notice | www.earthquakesound.com | 9 |