3
Communication options–connect anywhere
ConnectUPS Web/SNMP
card is a complete UPS
monitoring, control and
shutdown solution in a
networked IT environment.
In case of alert, the Web/
SNMP card can notify users
and administrators through
e-mail and SNMP traps.
In case of a prolonged
power failure the protected
computer systems can be
shut down in a graceful
manner with NetWatch and
LanSafe software.
HTTP, SNMP, e-mail, WAP
and Telnet compatibility
enable dynamic and
versatile support for a
large variety of system
configurations.
The XSlot card for the 9390
also integrates a 3-port
switching hub to support
multiple PCs or networking
equipment.
Environmental Monitoring
Probe (EMP) enables
you to remotely monitor
environmental conditions
as easily as you monitor
power conditions. It adds
temperature, humidity
and two contact closure
monitoring capabilities
to ConnectUPS Web/
SNMP card. It can trigger
operating system shutdown
if user-defined thresholds
1. POWER FAILURE
2. POWER SAG
3. POWER SURGE
4. UNDERVOLTAGE
5. OVERVOLTAGE
6. SWITCHING TRANSIENT
7. LINE NOISE
8. FREQUENCY VARIATION
9. HARMONIC DISTORTION
are exceeded or contact
closure status changes.
Relay/AS400 card provides
an easy connection to IBM
AS/400 series computers
as well as industrial and
building management
systems. You can also build
a solution for a remote ON/
OFF function with the relay
card.
Powerware Software Suite,
our exclusive collection
of software on a CD-rom,
incorporates a full line of
shutdown and monitoring
software products to
enhance the protection
provided by Powerware
UPSs. The software suite,
conveniently packed on one
CD-rom, follows every UPS
free of charge.
ConnectUPS
Web/SNMP xHub
Powerware Modbus Card is
an XSlotTM UPS connectvity
device that provides
continuous, reliable and
accurate remote monitoring
of your UPS system through
a Building Management
System (BMS) or Industrial
Automation System (IAS).
The card integrates data
from the UPS into the user’s
management system using
Modicon®‚ Modbus RTU
Protocol. Key power quality
and UPS status information
may be monitored in
real time to aid in the
management of the UPS
and notification of potential
power problems.
Multi-Server card is a
power quality connectivity
product designed to enable
multiple devices connected
to a single UPS system to
be managed and controlled
independently. The Multi-
Server Card allows separate
communication with up to
six connected servers with
mixed operating systems.
XSlot modem card
connects your UPS device
to Powerware’s remote
monitoring centre for
a 24/7 software based,
fully automatic remote
UPS inspection over the
telephone network.