Eaton Electrical CA04801001E I/O Expansion Modules, Ethernet Expansion Module, Accessories, March

	Operator Interface Products	11
	HMi Operator Interface
March 2008
	Software and Accessories
Accessories
	I/O Expansion Modules

HMIECENT Ethernet Expansion Module

Ethernet Expansion Module

The HMIECENT expansion module adds 10/100 MB Modbus TCP ability when plugged into the expansion slot of a 6", 8" or 10" HMi unit. Up load and download programs and com- municate to other Modbus TCP devices. No need for patch or crossover cables as this module auto-detects and adjusts for proper operation.

Connection Port for	Nameplate
Ethernet
	Connection Port for
	Extension Module

Direct Mounting Hole

Figure 6. Ethernet Expansion Module — Product Outline

Table 10. HMICENT Function Specifications

Item	Specifications
Power Supply Voltage	DC 5V ±10%, 1A (provided by HMi )
Interfaced Supported	RJ-45 with Auto MDI/MDIX
Number of Ports	1 Port
Transmission Method	IEEE 802.3, IEEE 802.3u
(Standard Conformance)
Transmission Cable	Category 5e (TIA/EIA-568-A, TIA/EIA-568-B)
Transmission Speed	10/100 Mbps Auto Detection
Ethernet Protocol	ICMP, IP, TCP, UDP, DHCP, Modbus TCP
Noise Immunity	ESD (IEC 61131-2,
	IEC 61000-4-2): 8 kV Air Discharge
	EFT (IEC 61131-2, IEC 61000-4-4):
	Power Line: 2 kV,
	Communication I/O: 1 kV
	Damped-Oscillatory Wave:
	Power Line: 1 kV, Digital I/O: 1 kV
	RS (IEC 61131-2,
	IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m

The HMIEC0806 and HMIEC1612 are 14 and 28 discrete I/0 expansion modules providing 8 DC inputs and 6 relay out- puts or 16 DC inputs and 12 relay outputs. Plug this module into the available expansion slot on the back of the HMi unit (not available on the 4" model) and it’s ready to use. No need for a separate PLC controller as it is built into the unit. Com- bine operator interface and logic into a single platform — use HMISOFT to build both the ladder logic and OI program.

Connection Port

Input/Output Terminals

Nameplate

Direct Mounting Hole

Figure 7. I/O Expansion Modules — Product Outline

Table 11. I/O Expansion Modules

Catalog	Input/Output
Number
	Power	Input Unit		Output Unit
		Point	Type	Point	Type
HMIEC0806	5V DC	8	DC Type	6	Relay
	supplied		Sink or
HMIEC1612		16		12	Relay
	by HMi		Source

CA04801001E For more information visit: www.eaton.com