EAW AS625e specifications Dimensional Drawing, Specifications

DIMENSIONAL DRAWING

INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE (PI ANGLE).

INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE (NUT PLATE).

SYMBOL INDICATES CENTER OF BALANCE.

24.62

36.00

GRILLE PARTIALLY SHOWN

		FRONT
	4.00	CL
		(1.50)
		CL	33.00
5.00
		INPUT
7.34		BACK
		(16.51)
		13.64
	A	CL
			23.00
8.75		16.31
		4.24
		19.39
A		20°
	TOP/BOTTOM
		16.56
		4.63
		CL
		32.10

509140 (0) 5/22/01

SIDE VIEW (VIEW A-A)

Manufacturing tolerances are +/- 0.13 and +/- 1°

SPECIFICATIONS AS625e

A & E SPECIFICATIONS

The low frequency loudspeaker system shall incorporate 2x 15-in LF transducers that shall be mounted in a vented enclo- sure tuned for optimum LF response.

System frequency response shall vary no more than ±3 dB from 57 to 500 Hz measured on axis. The system shall produce a Sound Pressure Level (SPL) of 100 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of pro- ducing a peak output of 136 dB SPL on axis at 1 meter. The system shall handle 1200 Watts of amplifier power (continu- ous) and shall have a nominal impedance of 4 Ohms.

The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of multi-ply, void-free, cross-grain-lami- nated, exterior grade, Baltic birch plywood and shall employ extensive internal bracing. It shall be finished in wear-resist- ant textured black paint. Input connector shall be 2-contact terminal strip. Eighteen (18) 3/8"-16 threaded mounting/sus- pension points (4 each top, bottom and sides, 2 on back) shall be provided. The front of the loudspeaker shall be cov- ered with a powder coated perforated steel grille.

The low frequency loudspeaker shall be the EAW model AS625e.

One	Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw.com	www. eaw. com
EAW	products are continually improved. All specifications are therefore subject to change without notice.			AS625e/2 pp	October 2001	Printed in USA