EAW JFL210 specifications Features, Description, Way full-range, 110 ×

J F L 2 1 0 S p e c i f i c a t i o n s

group · J

FEATURES

•Constant curvature line array

•Very easy to pole mount, fly and ground stack

•Vertical arrays of up to six units may be constructed

•High output capability and predictable pattern control

DESCRIPTION

The JFL210 compact line array module features a range of EAW’s most innovative line array technologies within a mobile, light weight package that’s an ideal solution for a multitude of small- and medium-sized applications, including portable and installed A/V as well as musician/DJ systems. Incorporating constant curvature line array design principles, JFL210 modules form easily configured arrays with very predictable coverage that is both horizontally symmetric and consistent from short to long throws.

The JFL210’s size, shape and weight are optimized for transport and set- up by one person. Side handles are integrated with the rigging system and are aligned with the enclosure’s center of gravity for superior balance and stability. Up to two JFL210s may be mounted on a loudspeaker stand with a 35 mm / 1.38 in diameter pole. Dual-angle, integral pole mount holes allow the bottom enclosure to be aimed 0° or -15°.

The JFL210’s ultra-strong rigging system has a 10:1 design factor, which meets or exceeds all standards enforced throughout the world. The rigging is simple to use – enclosures may be easily joined together by one person acting alone. For portable, flown applications the accessory FB121 Fly Bar will suspend up to six JFL210 and allow a wide range of array tilt angles to be readily achieved. The FB121 also doubles as a ground stack base for up to four JFL210s. Alternately, a pair of threaded M10 rigging points are available on the enclosure’s top and bottom panels for cost-sensitive permanent install applications.

Users may switch between single- or bi-amp powering modes. An additional HF Shading switch is active in single-amp mode. It optimizes high frequency response for single-box or multi-box arrays, or inserts a correction filter for the high frequency air loss encountered in long throw applications. When the JFL210 is operated in bi-amp mode the HF Shading filters are applied in DSP.

Dual Neutrik® Speakon® STX Series NL4 jacks are provided for system input. The STX Series’ all-metal housings are extremely rugged, and provide weather protection to IP54 when mated with a complementary STX Series cable connector. The powering mode and HF Shading switches are recessed and shrouded with a rubber boot for additional weather protection.

While the JFL210 offers excellent performance with nearly any loudspeaker processor, its response can be optimized even more precisely with an EAW UX8800 4×8 digital processor. The UX8800 functions as an excellent overall system manager, processor and controller, while its Gunness Focusing alignment and driver processing algorithms dramatically enhance temporal performance.

Overall construction matches the high standards long applied to EAW portable and touring products. Enclosures are protected by our tough, highly scratch-resistant RoadCoat™ finish and durable, foam-backed steel grilles protect the transducers while hiding them from view.

Six year warranty.

2-Way full-range, 110° × 15°

See NOTES TABULAR DATA for details

Configuration

Subsystem:	Transducer	Loading
LF	2 x 10 in cone	Vented
HF	1 x 1.4 in exit, 3 in voice	Horn-loaded
	coil compression driver
Operating Mode:
	Amplifier Channels	External Signal Processing
Single-amp	LF/HF	High Pass Filter
Bi-amp	LF,HF	DSP w/2-way filters
PERFORMANCE
Operating Range: 65 Hz to 18.5 kHz
Nominal Beamwidth:
Horz 110°
Vert	15°
Axial Sensitivity (whole space SPL):
LF/HF	95 dB	65 Hz to 18.5 kHz
LF	95 dB	65 Hz to 971 Hz
HF	105 dB	708 Hz to 18.5 kHz
Input Impedance (ohms):
	Nominal	Minimum
LF/HF	8	6.5 @ 280 Hz
LF	8	10.9 @ 270 Hz
HF	8	9.6 @ 4470 Hz
High Pass Filter: High Pass>=60 Hz, 12 dB/octave Butterworth
Accelerated Life Test:
LF/HF	80 V	800 W @ 8 ohm
LF	80 V	800 W @ 8 ohm
HF	35 V	150 W @ 8 ohm
Calculated Axial Output Limit (whole space SPL):
	Average	Peak
LF/HF	124 dB	130 dB
LF	124 dB	130 dB
HF	127 dB	133 dB
ORDERING DATA
Description		Part Number
EAW JFL210 Black		0029139-90
Optional Accessories
EAW FB121 Fly Bar Black		0031170
M10 x 1.5 Forged Shoulder Eyebolt		0029818

Eastern Acoustic Works • One Main Street • Whitinsville, MA 01588 • tel 800 992 5013 / 508 234 6158 • fax 508 234 8251 • www.eaw.com

EAW products are continually improved. All specifications are therefore subject to change without notice. Part Number: RD0480 (A) JFL210 September 2008