EAW KF913 specifications Features, Description, Application, Performance, Physical

FEATURES

•Medium throw/downfill HF Phased PointSource Technology™ module

•3x 2-in HF on separate SimplePhase™ horns

•PPST™ systems build arrays for the largest spaces

•Pre-configured DSP defines coverage by integrating cells and modules to fit its application

•P (install) or F (portable) versions available

DESCRIPTION

A dedicated PPST™ medium throw/downfill high frequency system in a trapezoidal enclosure. Includes 3x 2-in exit com- pression drivers on SimplePhase™ horns.

APPLICATION

The KF913 PPST™ downfill HF module is engineered for use in KF900 Series arrays. It provides HF coverage from -0° to -60° below the array. KF900 Series modules can only be used in arrays and must be integrated with complex PPST processing. Six year warranty.

Applications include:

Stadiums Concert Tours

PERFORMANCE

Frequency Response (1 Watt @ 1m)

±3 dB	500 Hz to 14 kHz
-10 dB	400 Hz to 16 kHz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
HF	114
Impedance (Ohm)
HF	3x 8
Power Handling, AES Standards (Watts)
	3x 200
Recommended Amplifier Power (Watts)
HF (MF/HF)	3x 400
Calculated Maximum Output (dB SPL @ 1m)
HF Peak	148.0
HF Long Term	141.0
Nominal Coverage Angle, -6 dB Points (degrees)
Horizontal	30
Vertical	Beam profile adjustable via
	PPST™ processing
Recommended High-Pass Frequency
24 dB/Octave	1250 Hz, 500 Hz Minimum
Recommended Complementary Systems
Sub	KF940
LF	KF930
Mid/High	KF920/KF910

SPECIFICATIONS KF913

Prototype shown with temporary hardware

PHYSICAL

HF Subsystem		3X 2-in exit compression drivers
		on 30° (H) SimplePhase horns
Configuration		Dedicated HF, medium throw,
		downfill
Powering		Active processing
System Crossover		800 Hz to 1300 Hz
Controls (switches, knobs)		None
Cabinet Type (shape)		Trapezoidal
Enclosure Materials		Baltic birch plywood
Finish		Black catalyzed polyurethane
Connectors		One each male and female AP6
Suspension Hardware		(16) 3/8”-16 threaded mounting
		points (4 each top, bottom and
		sides)
Grille		Vinyl coated perforated steel,
		foam backed
Dimensions		inches	millimeters
Height		46.00	1168
Width (front)		30.00	762
Width (rear)		8.56	217
Depth	40.00		1016
Trapezoid Angle		15° per Side
Weights	pounds		kilograms
Net Weight		258	117.4
Shipping Weight		266	121.0

One	Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw.com	www. eaw. com
EAW	products are continually improved. All specifications are therefore subject to change without notice.			KF913/888058(B)/2 pp	5/1/00	Printed in USA