EAW KF913 specifications Dimensional Drawing, Input Plate, Specifications

DIMENSIONAL DRAWING

KF913	CENTER OF BALANCE.
	ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED.
30.00
		42.00
		46.00	7.00
			15.63	23.00
FRONT				4.50
				BACK
			8.75	18.75
8.56		A
22.00
		40.00		22.00
			10.81
	30°	A	6.44
510542 (1)	TOP			RIGHT (VIEW A-A)
EXP 8/27/97 SHB
Manufacturing tolerances are +/-0.13 and +/-1°

INPUT PLATE

KF913

S/N

AP6-MALE		AP6-FEMALE
1	5	5	1
	6		6
2	4	4	2
	3		3

C A N N O NC A N N O N

PIN 1... HF A-- PIN 3... HF B -- PIN 5... HF C --

PIN 2... HF A+ PIN 4... HF B+ PIN 6... HF C+

SPECIFICATIONS KF913

A & E SPECIFICATIONS

The medium throw/downfill high frequency module shall incorporate 3x horn-loaded 2-in exit compression driver HF transducers. The module shall have a nominal horizontal cov- erage pattern of 30°. The module’s vertical beam profile shall be adjustable via complex digital signal processing. The mod- ule shall be integrated with complementary frequency-specif- ic modules into a single acoustical unit via complex digital signal processing.

Module frequency response shall vary no more than ±3 dB from 500 Hz to 14 kHz measured on axis. The module shall produce a Sound Pressure Level (SPL) of 114 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capa- ble of producing a peak output of 148 dB SPL on axis at 1 meter. Each driver shall handle 200 Watts of amplifier power (AES Standard) and shall have a nominal impedance of 8 Ohms.

The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of 1/2-in thickness void-free cross-grain- laminated Baltic birch plywood and shall employ extensive internal bracing. It shall be finished in black catalyzed polyurethane. Input connectors shall be one each male and female AP6. The enclosure shall include sixteen 3/8”-16 threaded mounting points (4 each top, bottom and sides). The front of the loudspeaker shall be covered with a vinyl coated perforated steel grille backed with open cell foam to protect against dust.

The medium throw/downfill high frequency module shall be the EAW model KF913.

One	Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw. com	www. eaw. com
EAW	products are continually improved. All specifications are therefore subject to change without notice.			KF913/888058(B)/2 pp	5/1/00	Printed in USA