DIMENSIONAL DRAWING

KF930

CENTER OF BALANCE

ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED

30.00

46.00

42.00

7.0023.00

9.13

4.50

FRONTBACK

8.75 18.75

8.56 A

27.75

 

 

 

22.00

 

 

40.00

 

 

 

 

 

 

10.81

 

510519 (1)

30°

A

6.44

RIGHT SIDE (VIEW A-A)

TOP

 

EXP 8/27/97 SHB

 

 

Manufacturing tolerances are +/-0.13 and +/-1°

INPUT PLATE

KF930

S/N

AP6-22 (M)

 

AP6-21 (F)

1

5

 

5

1

6

 

 

 

6

2

4

 

4

2

3

 

 

 

3

C A N N O N

 

C A N N O N

PIN 1 ... UPPER

LF --

PIN 3 ... LOWER

LF --

PIN 5 ... NC

PIN 2 ... UPPER LF+

PIN 4 ... LOWER

LF+

PIN 6 ... NC

SPECIFICATIONS KF930

A & E SPECIFICATIONS

The dedicated low frequency module shall incorporate 4x 15- in LF transducers. The LF drivers shall be reverse mounted in horizontal pairs to optimize LF driver coupling. The module’s horizontal and vertical beam profiles shall be adjustable via complex digital signal processing. The module shall be inte- grated with complementary frequency-specific modules into a single acoustical unit via complex digital signal processing.

The module shall be equipped with a switch to control an internal passive filter network providing processing appropri- ate to the modules use in an inner or outer array column.

Module frequency response shall vary no more than ±3 dB from 38 Hz to 350 Hz measured on axis. The module shall pro- duce a Sound Pressure Level (SPL) of 101 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 140 dB SPL on axis at 1 meter. Each driver pair shall handle 2000 Watts of amplifier power (AES Standard) and shall have a nominal impedance of 4 Ohms.

The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of 1/2-in thickness void-free cross-grain- laminated Baltic birch plywood and shall employ extensive internal bracing. It shall be finished in black catalyzed polyurethane. Input connectors shall be one each male and female AP6. The enclosure shall include sixteen 3/8”-16 threaded mounting/suspension points (4 each top, bottom and sides). The front of the loudspeaker shall be covered with a vinyl coated perforated steel grille backed with open cell foam to protect against dust.

The dedicated low frequency module shall be the EAW model KF930.

One Main Street, Whitinsville, MA 01588

508 234 6158

Toll Free 800 992 5013

FAX 508 234 8251

info@eaw. com

www. eaw. com

EAW products are continually improved. All specifications are therefore subject to change without notice.

KF930/888060(A)/2 pp

1/29/99

Printed in USA

Page 2
Image 2
EAW KF930 specifications Dimensional Drawing, Input Plate, Specifications

KF930 specifications

The EAW KF930 is a high-performance loudspeaker designed to deliver exceptional sound quality and reliability in various professional audio applications. This model is widely favored among sound engineers for its versatility, making it ideal for both live performances and fixed installations.

One of the standout features of the KF930 is its unique enclosure design, which is crafted from high-quality plywood and finished in a durable polyurea coating. This design not only improves the speaker's aesthetic appeal but also enhances its acoustic performance by minimizing resonance and allowing the drivers to operate more efficiently. The KF930 features a compact and lightweight structure, making it easy to transport and set up for events.

Technologically, the KF930 is equipped with advanced components that set it apart from other loudspeakers in its class. It is powered by a dual 10-inch woofer configuration, which provides deep, punchy bass and a broad frequency response. The speaker also incorporates a high-frequency compression driver, allowing it to project clear and articulate highs that can cut through dense mixes and reach audiences even in large venues.

Another characteristic of the KF930 is its impressive array capabilities. It is designed for seamless integration into larger sound reinforcement systems, allowing multiple units to be stacked or arrayed together without compromising audio quality. This feature is particularly beneficial for large-scale events, where consistent coverage and sound pressure levels are essential.

Moreover, the KF930 is engineered with digital signal processing (DSP) capabilities that further enhance its performance. This allows for precise tuning that can be tailored to different environments, ensuring optimal sound quality regardless of the acoustics of the venue. The built-in protection circuitry safeguards the components from overloading, extending the loudspeaker's lifespan and maintaining its reliability during demanding performances.

The EAW KF930 stands out as a robust solution for audio professionals seeking a speaker that combines innovative technology, rugged build quality, and exceptional sound performance. With its arraying capabilities and versatile design, the KF930 continues to be a favored choice across various applications, from concerts to corporate events.