EAW MQV2364e specifications Dimensional Drawing, Specifications

DIMENSIONAL DRAWING

SPECIFICATIONS MQV2364e

A & E SPECIFICATIONS

C

L

15.71

8.08

(1.95)

52.35

VIEW A-A

DIMENSIONS

APPLY

TO TOP AND

BOTTOM56.25

36.71

GRILLE PARTIALLY SHOWN

FRONT

A
	25.59	A	27.50
7.50		10.92	4.00
	15.34
		5.00
25°	C		C
29.61		22.81
	L		L
	12.50	(25.36)
		INPUT
	SIDES			2X ACCESS
APPLY DIMENSIONS			BACK	PANEL
TO BOTH SIDES

The 3-way full-range loudspeaker shall incorporate two 15-in slot-loaded woofers, two 10-in MF cones with Radial Phase Plug™, and a 2-in exit/3-in diaphragm HF compression driv- er. The MF and HF devices shall be loaded on horns that pro- vide a nominal 60° x 40° beamwidth. An internal passive crossover network shall offer either bi- or tri-amplified oper- ation, configurable via jumpers on the input panel.

System frequency response shall vary no more than 63 dB from 70 Hz to 15 kHz measured on axis. The LF section shall produce a sound pressure level of 97 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of pro- ducing a peak output of 134 dB SPL on axis at 1 meter. The LF section shall handle 1200 watts of amplifier power (AES Standard) and shall have a nominal impedance of 4 ohms.

When operated in bi-amplified mode, the MF/HF section shall produce a sound pressure level of 108 dB SPL on axis at 1

NOTES:
1. SYMBOL INDICATES MOUNTING POINT,
3/8-16 THREADE HOLE (PI ANGLE).
2. SYMBOL INDICATES CENTER OF BALANCE.
3. WEIGHT APPROX. 300 LBS.
4. SHIPPING WEIGHT APPROX. 330 LBS.	0002341(A) 9/11/02

Manufacturing tolerances are +/-0.13 and +/-1°

meter with a power input of 1 watt, and shall be capable of producing a peak output of 140 dB SPL on axis at 1 meter. The MF/HF section shall handle 800 watts of amplifier power (AES Standard) and shall have a nominal impedance of 4 ohms.

When operated in tri-amplified mode, the MF section shall produce a sound pressure level of 110 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of producing a peak output of 142 dB SPL on axis at 1 meter. The MF section shall handle 800 watts of amplifier power (AES Standard) and shall have a nominal impedance of 4 ohms. The HF section shall produce a sound pressure level of 108 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of producing a peak output of 136 dB SPL on axis at 1 meter. The HF section shall handle 150 watts of amplifi- er power (AES Standard) and shall have a nominal impedance of 8 ohms.

The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of exterior grade Baltic birch plywood and shall employ extensive internal bracing. It shall be fin- ished in wear-resistant textured black paint. Input connectors shall be a terminal strip. A total of 16x 3/8”-16 threaded mounting/suspension points (4 each top, bottom, and sides) shall be provided. The front of the loudspeaker shall be cov- ered with a powder coated perforated steel grille.

The 3-way full-range loudspeaker shall be the EAW model MQV2364e.

One Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.			MQV2364e/0002692/002/2 pp	October 2003	Printed in USA