99944200595 | MAINTENANCE |
|
|
1.Brush loose debris from blade and coat both sides of blade with the
2.Allow cleaning mixture to soften the remaining gummy residue then wipe it from the blade.
3.Apply clean oil to the entire length of the blade. Be certain the blade bolts are lubricated.
4.Wipe excess oil from the blade before putting the unit back in service.
Gear Case
Level 1.
Parts Required: Lithium Base Grease.
1.Clean dirt from the grease fitting (A).
2.Carefully pump grease into fitting (A). DO NOT force grease. Too much pressure will force grease past seals and cause damage. Apply
3.Wipe excess grease from around grease fitting.
Drive Shaft Assembly
Level 1.
Parts Required: Lithium Base Grease.
Hedge Clipper blades are very sharp. Touching them may lead to severe personal injury. Avoid touching blades whenever possible, and always wear gloves to protect hands.
1.Carefully remove locating screw (A) and loosen clamping screw (B). Remove the flex drive shaft assembly from the gear housing..
2.Pull the drive shaft (C) from the drive shaft assembly, and wipe clean.
3.Slide the flex shaft back into the drive shaft assembly, being careful not to get dirt on the flex shaft.
A
A
A D
B
X7532095608 | 17 |
© 3/2015 ECHO Inc.