Echo 265, 261, 231, SRM-2100SB, 2400, 260SB, 225, 230 Rotate Cutter Assembly, Operation, 99944200595

OPERATION 99944200595

3.Turn hedge clipper ¼ turn so that indexing ring faces downward.

4.Release hand-guard blade lock (B) with right hand, while holding blade-adjustment handle (C) with left hand.

5.Rotate blades to desired cutting position and hold in place.

6.Turn indexing ring ¼ turn to lock blade in place.

Gear case assembly becomes HOT during use. Always grip assembly at blade-adjustment handle when making cutting angle adjustments, otherwise serious injury may result.

B

B

C

Always install blade cover, and return cutting assembly to folded/locked position for travel/storage.

Rotate Cutter Assembly

Always use the unit from the right-hand side of your body – NEVER from the left side. Rotate cutter assembly 180 degrees on driveshaft in order to avoid cutting directly above your head, and to avoid contact with hot muffler.

1.Loosen gearcase clamping screw (A), hand guard clamping screw (B), and remove gearcase locating screw (C).

2.Rotate cutter assembly 180-degrees on driveshaft until locating hole in driveshaft is visible through locating hole in gearcase.

3.Install gearcase locating screw (C), and securely tighten all hardware.

B

C

A

During operation, the complete unit, especially the drive shaft housing and gearcase may become too hot to touch. Avoid contact when rotating cutter assembly.

14 X7532095608

© 3/2015 ECHO Inc.