Drive Shaft Lower | Echo 99944200470 instruction

POWER EDGER ATTACHMENT OPERATOR'S MANUAL 11

Drive Shaft (Lower)

IMPORTANT

Lower and upper drive shaft must be lubricated with high temperature automotive grease every 25 hours of operation, otherwise drive shaft assembly overheating and failure can result.

1.Loosen two (2) screws (A) and remove center locating screw (B). Pull gear box and shield from drive shaft housing.

2.Pull flexible cable (C) from the drive shaft housing, wipe clean and re-coat with a thin coating [15 ml (1/2 oz.)] of ECHO® LUBETM.

3.Slide the flexible cable (C) back in the drive housing. DO NOT get dirt on the flex cable.

4.Install the gear housing and shield assembly.

Page 11

Image 11

Echo 99944200470 manual Drive Shaft Lower

Contents

Power Edger Attachment Operators Manual Safety ManualTable of Contents Introduction Shaft Decal Manual Safety Symbols and Important InformationSafety Decals Hearing Protection Physical ConditionEye Protection Hand Protection Equipment Vibration and ColdRepetitive Stress Injuries Extended OPERATION/EXTREME Conditions Description ContentsSafe Operation Model SpecificationsAssembly Power Head SHAFT/LOWER Shaft Assembly Operating Techniques Operation Skill Level MaintenanceMaintenance Intervals Level Blade REPLACEMENT/LUBRICATION Drive Shaft Lower Echo Consumer Product Support ServiceWarranty Registration Additional or Replacement Manuals Servicing Information Parts SUP22203664 99922203664 04/03