POWER EDGER ATTACHMENT | 3 |
OPERATOR'S MANUAL |
MANUAL SAFETY SYMBOLS AND IMPORTANT INFORMATION
Throughout this manual and on the product itself, you will find safety alerts and helpful, information messages preceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to you.
This symbol accompanied by the words WARNING and DANGER calls attention to an act or condition that can lead to serious personal injury to operator and bystanders.
The circle with the slash symbol means whatever is shown within the circle is prohibited.
IMPORTANT | NOTE |
|
|
IMPORTANT The enclosed message provides information necessary for the protection of the unit.
NOTE This enclosed message provides tips for use, care and maintenance of the unit.
SAFETY
DECALS
Locate these safety decals on your unit. The complete unit illustration found in the "DESCRIPTION" section, will help you locate them. Make sure the decals are legible and that you understand and follow the instructions on them. If a decal cannot be read, a new one can be ordered from your ECHO Dealer. See PARTS ORDERING instructions for specific information.
These decals are in English only:
Shaft Decal
Shaft Decal
WARNING 
DANGER
•WHEN USED IMPROPERLY, THIS EDGER COULD CAUSE SERIOUS PERSONAL INJURY. READ AND FOLLOW ALL SAFETY PRECAUTIONS IN THE OWNER'S MANUAL. •NEVER OPERATE WITHOUT EYE PROTECTION. ALWAYS INSPECT AREA FOR HIDDEN OR THROWABLE OBJECTS. NEVER USE IN GRAVEL. •STAY CLEAR OF ROTATING BLADE AT ALL TIMES. KEEP BYSTANDERS AT LEAST 50 FEET AWAY. •STOP ENGINE BEFORE ADJUSTING CUTTING HEIGHT OR PERFORMING ANY SERVICE. •NEVER OPERATE WITH UNIT POSITIONED ON LEFT SIDE OF THE BODY. •USE ONLY ECHO APPROVED REPLACEMENT BLADES ON THIS UNIT. •DO NOT USE EDGER BLADE ON ANY BRUSH CUTTER. •EDGER ATTACHMENT AND BLADE ARE INTENDED FOR EDGING ONLY. •AFTER REPLACING OR SERVICING BLADE, ARBORS, NUT AND COTTER PIN MUST BE USED PROPERLY.
P/N 89016052631
P/N 89016025560
