Echo 99944200532 manual Contents, Assembly Power head shaft/lower shaft assembly

8

Contents

The ECHO product you purchased has been factory pre-assembled for your convenience. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.

1 - Power PrunerTM Attachment

-Plastic Bag (co-pack)

-Operators Manual

-Safety Manual

-Warranty Registration Card

-Guide Bar Cover

-Storage Hook Assembly

Assembly

power head shaft/lower shaft assembly

Tools Required: None

Parts Required: PAS or SRM-SB Power Head w/Shaft & Coupling.

1.Set Power Head/Shaft Assembly on a level surface.

2.Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to lock- out position.

3.Remove vinyl cap from attachment drive shaft.

4.Carefully fit attachment drive shaft assembly into coupler (B) to decal assembly line (C), making sure that the inner lower drive shaft engages into the square upper drive shaft socket.

NOTE

Earlier model Power Heads may have shorter couplings. Short couplings fit flush to decal point (E). New couplings are 4-3/4 in. long, and fit flush to line (C).

NOTE

Lower bearing housing and head assembly must be in line with the engine.

B

D

A

D

C

E