8

CONTENTS

The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, shield installation and other assembly may be necessary.

After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.

____ 1 - PAS Hi Torque Trimmer Attachment

____ 1 - Operator's Manual

____ 1 - Safety Manual

____ 1 - Warranty Registration Card

____ 1 - Locking Tool

____ 1 - T-Wrench

____ 1 - Plastic Debris Shield

____ 1 - Nylon Trimmer Head

____ 1 - Safety Goggle

____ 1 - Shield Plate

____ 3 - 5mmx16mmScrews(shieldmounting)

____ 1 - Storage Hook Assembly

ASSEMBLY

POWER HEAD SHAFT/LOWER SHAFT ASSEMBLY

Tools

Required: None

 

 

Parts

Required: PAS or SRM-SB Power Head w/Shaft & Coupling.

 

 

1. Set Power Head/Shaft Assembly on a level surface.

 

 

 

B

2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to

 

D

lock-out position.

 

 

 

3. Remove vinyl cap from attachment drive shaft.

 

 

4. Carefully fit attachment drive shaft assembly into coupler (B) to

 

E

decal assembly line (C), making sure that the inner lower drive shaft

 

 

C

engages into the square upper drive shaft socket.

 

 

 

 

 

 

NOTE

 

A

Earlier model Power Heads may have shorter couplings. Short

 

 

couplings fit flush to decal point (E). New couplings are 4-3/4 in.

 

 

long, and fit flush to line (C).

 

 

 

 

 

 

 

 

NOTE

 

 

Lower bearing housing and head assembly must be in line with the

 

 

engine.