6
equipment
Before operation a complete check of the unit must be performed;
•Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed.
•Inspect shield for damage. Replace if shield is damaged or missing.
•Check that the cutting attachment is firmly attached and in safe operating condition.
•Check that front loop handle is adjusted for safe, comfortable operation. See Assembly Section for proper adjustment.
WARNING
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all
openings.
•ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.
•DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.
•NEVER reach into any opening while the engine is running. Moving parts may not be visible through openings.
Description
Locate this safety decal on your attachment. Make sure the decal is legible and that you understand and follow the instructions on it. If it cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING
instructions for specific information.
1
2
P/N X505005920
4 
3
