Cap indication

Oil/fuel tanks are indicated by the following illustrations on the caps.

Oil tank cap

Fuel tank cap

CHAIN LUBRICANT

Proper lubrication of the chain while in operation reduces friction between the chain and the guide bar to a minimum and assures a longer service life.

Use bar and chain oil of high quality for this purpose.

Do not use used or reclaimed oil to avoid various oiler problems.

Use ECHO bar and chain oil.

When ECHO bar and chain oil is not available: Use motor oil, etc.

Use bar and chain oil of the following grades: SAE No. 30 .......in summer

SAE No. 10 .......in winter or when cutting

resinous trees.

• When refueling, also refill chain oil.

OPERATION

Chain brake

Start / Run

Ignition switch

WARNING

After choke control knob is turned and then knob is returned to original position, throttle remains a little open (latch condition).

If engine is started in this latch condition, chain starts to turn. Do not start engine before chain brake is activated.

Choke

Purge pump

Choke control knob

Starter handle

CAUTION

After starting the engine, squeeze throttle trigger slightly to release throttle latch and pull front hand guard towards the operator immediately.

(Chain brake unlocked position)

Never use throttle latch for cutting.

Use the chain brake only in starting or in emergencies.

Unlock chain brake

CS-271T

14