| SETTING THE SAW CHAIN |
|
|
|
|
| Preset tie strap |
|
Drive link | Left hand cutter |
|
|
| Top plate |
Tie strap |
| Side plate |
|
| |
| Guard link | Depth guage |
Right hand cutter
| Important points for proper maintenance of saw |
| chain: |
| • Keep the cutters sharp at all times. |
| • Keep the left and the right cutters properly |
| aligned. |
| - Note that blunt or irregular cutters will result in |
| poor cutting performance, increased vibration |
| of chains and premature breakage of the saw |
| chain. |
Sharpen lower edge | • Drive link serves to remove sawdust from the |
| groove of the guide bar. |
| Keep the lower edge of the drive link sharp |
| where indicated. |
30°
Keep this angle
SETTING SAW CHAIN
•For setting saw chain, round file (90SG: 4.5 mm
dia. or 91VG: 4.0 mm dia. 5/32 in.) and flat file are used.
•To keep correct position and correct angle, use the file holder (Sure Sharp®).
Push file as shown
90°
Hold the file horizontally
27 |