Echo CS-271T instruction manual Operation, Chain Lubricant

Models: CS-271T

1 36
Download 36 pages 20.09 Kb
Page 16
Image 16
CHAIN LUBRICANT

Cap indication

Oil/fuel tanks are indicated by the following illustrations on the caps.

Oil tank cap

Fuel tank cap

CHAIN LUBRICANT

Proper lubrication of the chain while in operation reduces friction between the chain and the guide bar to a minimum and assures a longer service life.

Use bar and chain oil of high quality for this purpose.

Do not use used or reclaimed oil to avoid various oiler problems.

Use ECHO bar and chain oil.

When ECHO bar and chain oil is not available: Use motor oil, etc.

Use bar and chain oil of the following grades: SAE No. 30....... in summer

SAE No. 10....... in winter or when cutting resinous trees

When refueling, also refill chain oil.

OPERATION

Chain brake

Start / Run

OPERATION Ignition switch

Purge pump

Manual background ChokeManual backgroundManual backgroundManual background Choke control knob

WARNING

After choke control knob is turned and then knob is returned to original position, throttle remains a little open (latch condition).

If engine is started in this latch condition, chain starts to turn. Do not start engine before chain brake is activated.

CAUTION

After starting the engine, immediately squeeze and release throttle trigger for disengaging throttle latch and returning engine to idle, and pull front hand guard towards the operator immediately. (Chain brake unlocked position)

Never use throttle latch for cutting.

Use the chain brake only in starting or in emergencies.

Starter handle

Manual backgroundManual backgroundManual backgroundManual backgroundManual background Unlock chain brake

CS-271T

14

Page 16
Image 16
Echo CS-271T instruction manual Operation, Chain Lubricant