Echo CS-303T Chain And Guide Bar Combination, Saw Chain, Low-kickback, Operation

OPERATION CS-303T

Chain And Guide Bar Combination

The following combinations are recommended for model CS-303T.

Low Kickback Guide Bar			Low Kickback Saw Chain					Kick Guard
Length	Bar P/N	Chain P/N		Links	Type	Pitch	Gauge	Echo P/N
								(OEM P/N)
12”	12A0CD3745	91PX45CQ		45
		91VG45CQ			91PX			2894901
						3/8”	0.050
14”	14A0CD3752	91PX52CQ		52	91VG			28949
		91VG52CQ

Use of replacement saw chain and/or guide bar other than that specified, or operation without the “tip guard” in place, may cause severe kickback resulting in serious injury.Only use saw chain designated as, “LOW-KICKBACK,” that meets ANSI B175.1 or CSA Z62.1, .3 Standard when tested on the representative sample of chain saws below 3.8 C.I.D., and Echo guide bar specified.

Chain and guide bar gauge size must be identical. Use Bar/Chain combinations shown in table above.

If your tip guard is damaged or lost, contact your Echo dealer for a replacement. For the name of the Echo dealer nearest you, Call: 1-800-432-ECHO (3246) or on the web at www.echo-usa.com.

Refer to your Chain Saw Safety Manual for tip guard application information.

Guide Bar

(Low-kickback)

Replacement guide bars.

The following guide bars may be considered to have equivalent kickback energy.

•Sprocket nose guide bars of the same length and nose radius, same pitch and having the same number of teeth.

•Hard nose guide bars of the same length and nose radius as a sprocket nose bar.

Saw Chain

(Low-kickback)

Do not use replacement saw chain unless it has been designated as meeting ANSI B175.1 or CSA Z62.1, .3 kickback performance requirements, when tested on the representative sample of chain saws below 3.8 c.i.d. specified in ANSI B175.1 or CSA 62.1, .3.

Note: LOW KICKBACK SAW CHAIN meets the kickback performance requirements of ANSI B175.1 or CSA 62.1, .3 (safety requirements for gasoline-powered chain saws).

26 X7503207802

© 08/2013 ECHO Inc.