CHAIN AND GUIDE BAR COMBINATION
The following combinations are recommended for model
| Guide Bar |
| Saw chain |
| |
Length | Part No. | Pitch | Part No. | Links | |
mm (in) | Double Guard | mm (in) | |||
|
| ||||
|
|
|
|
| |
305 (12) | 12A0CD3745 | 9.53 (3/8) | 91VG45CQ, 91P45CQ | 45 | |
356 (14) | 14A0CD3752 | 9.53 (3/8) | 91VG52CQ, 91P52CQ | 52 | |
406 (16) | 16A0CD3757 | 9.53 (3/8) | 91VG57CQ, 91P57CQ | 57 | |
|
|
|
|
|
GUIDE BAR
(Low-kickback) Replacement guide bars.
The following guide bars may be considered to have equivalent kickback energy.
• Sprocket nose guide bars of the same length and nose radius, same pitch and having the same number of teeth.
• Hard nose guide bars of the same length and nose radius as a sprocket nose bar.
SAW CHAIN
CAUTION
Do not use replacement saw chain unless it has been designated as meeting the ANSI B175.1 - 2000 kickback performance requirements, when tested on the representative sample of chain saws below 3.8 c.i.d. specified in ANSI B175.1 - 2000.
NOTE
LOW KICKBACK SAW CHAIN meets the kickback performance requirements of ANSI
22 |
