CHAIN AND GUIDE BAR COMBINATIONS

The following combinations may be used on CS-330T and CS-360T.

 

 

LOW KICKBACK

 

LOW KICKBACK SAW CHAIN

 

KICK

 

 

GUARD BAR

 

 

GUARD

 

BAR

 

 

 

 

 

 

MODEL

 

 

 

 

 

 

 

 

LENGTH

 

CHAIN

 

 

 

 

 

ECHO P/N

 

 

 

 

 

 

 

 

 

BAR P/N

 

LINKS

TYPE

PITCH

GAUGE

 

 

PART NO.

 

(OEM P/N)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CS-330T

12"

12A0ED3745

91VG-45

 

45

 

 

 

2894901

14"

14A0ED3752

91VG-52

 

52

91VG

3/8"

.050

CS-360T

 

28949

16"

16A0ED3757

91VG-57

 

57

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*Reduced nose radius symmetrical bars (OREGON name — Double Guard)

WARNING DANGER

Use of replacement saw chain and/or guide bar other than that specified, or operation without the “tip guard” in place, may cause severe kickback resulting in serious injury.

Only use saw chain designated as, “LOW-KICKBACK,” that meets the ANSI B175.1-2000 Standard when tested on the representative sample of chain saws below 3.8 C.I.P. specified, and the Echo guide bar specified.

IMPORTANT

Chain and guide bar gauge size must be identical. Use Bar/Chain combinations shown in table above.

IMPORTANT

If your kick guard is damaged or lost, contact your Echo dealer for a replacement. For the name of the Echo dealer nearest you, Call: 1-800-432-ECHO (3246) or on the web at www.echo- usa.com.

Refer to your Chain Saw Safety Manual for kick guard application information.

21