CAP INDICATION
Fuel/oil tanks are indicated by the following illustrations.
FUEL TANK CAP | OIL TANK CAP |
CHAIN LUBRICANT
Proper lubrication of the chain while in operation reduces friction between the chain and the guide bar to a minimum and assures a longer service life.
•Use bar and chain oil of high quality for this purpose.
•Do not use used or reclaimed oil to avoid various oiler problems.
•Use ECHO bar and chain oil.
•When ECHO bar and chain oil is not available: Use motor oil, etc.
•Use bar and chain oil of the following grades: SAE No. 30 .......in summer
SAE No. 10 .......in winter or when cutting
resinous trees.
• When refueling, also refill chain oil.
OPERATION
Chain brake
Ignition switch
START/RUN
Choke control knob
CHOKE
Starter handle 
Release chain brake
WHEN THE ENGINE IS COLD
CAUTION
Make sure bar and chain are free from any obstruction when starting the saw.
•Move chain brake lever fully forward to engage chain brake before starting.
•Fill the fuel tank with fuel mixture.
It is not permitted to fill fuel above the shoulder level of fuel tank.
•Fill the chain oil tank with lubricant. Do not over fill.
•Move ignition switch to “RUN” position.
•Pull choke control knob all the way out. (Choke position)
•Securely hold the chain saw as shown and pull starter handle several times until first firing sound.
•Push choke control knob all the way in.
•Pull starter handle to start the engine.
•After starting the engine, pull front hand guard towards the operator immediately. (Chain brake RELEASED position)
11 |