| MAINTENANCE |
|
|
Spark Arrestor Screen
A
Carbon deposits in muffler will cause drop in engine output and overheating. Spark arrestor screen must be checked periodically.
1. Remove air cleaner cover and remove spark plug lead.
2. Remove spark arrestor cover (C) and screen (B) from | B | C |
muffler (A) body. |
|
|
3.Clean carbon deposits from muffler components.
4.Replace screen if it is cracked, or has holes burned through.
5.Assemble components in reverse order.
Note: When cleaning carbon deposit, be careful not to damage the catalytic element inside muffler.
Exhaust Port Cleaning
Level 2.
Parts Required: As needed: Muffler gasket
1.Remove air cleaner cover and remove spark plug lead.
2.Remove engine cover.
3.Place piston at top dead center.
4.Remove muffler. Check parts for wear or damage, and replace if necessary.
5.Use a wood or plastic scraping tool to clean deposits from cylinder exhaust port.
Never use a metal tool to scrape carbon from the exhaust port. Do not scratch the cylinder or piston when cleaning the exhaust port. Do not allow carbon particles to enter the cylinder.
6.Install muffler. Tighten muffler mounting bolts (or nuts) to
7.Install engine cover and attach spark plug lead.
8.Replace air cleaner cover.
9.Start engine, and allow unit to warm up at idle for several minutes.
10.Stop engine, and
11.Install guide bar and chain. Adjust chain tension.
12.Start engine and check for exhaust leaks between muffler and cylinder head. Stop engine if leak is found and correct problem before operating chain saw.
X7503251407 | 33 |
© 12/2013 ECHO Inc.
