150 to 170 Kgf • cm
(130 to 145 in • lbf).

Cleaner cover knob

Air cleaner cover

Spark plug

 

 

 

Air filter

cover

 

Air filter

 

Cylinder cover

0.65 mm (0.026 in.)

Oil filter

Fuel filter

Oil tank cap Fuel tank cap

AIR FILTER

Check before every use.

Loosen cleaner cover knob and remove air cleaner cover and filter.

Brush off dust lightly, or clean with compressed air, or replace the air filter.

Reinstall air filter and cover.

CHECK FUEL SYSTEM

Check before every use.

After refueling, make sure fuel does not leak from around fuel pipe, fuel grommet or fuel tank cap.

In case of fuel leakage there is a danger of fire. Stop using the machine immediately and request your dealer to inspect or replace.

SPARK PLUG

Check periodically.

The standard spark gap is 0.65 mm (0.026 in.).

Correct the spark gap if it is wider or narrower than the standard gap.

• Fastening torque:

FUEL FILTER

Check periodically.

Do not allow dust to enter fuel tank.

A clogged filter will cause difficulty in starting engine or abnormalities in engine performance.

Pull the fuel filter out through fuel inlet port with a piece of steel wire or the like.

When the filter is dirty, replace it.

When the inside of the fuel tank is dirty, rinsing the tank out with gasoline can clean it.

OIL FILTER

Check periodically.

Do not allow dust to enter into oil tank.

A clogged oil filter will affect the normal lubricating system.

Pull it out through oil filling hole with a piece of steel wire or the like.

If the filter is dirty, wash it in gasoline or replace it.

When the inside of the tank gets dirty, rinsing the tank out with gasoline can clean it.

CS-400

26