MAINTENANCE

CS-450P

 

 

Carburetor Adjustment

 

 

Every unit is run at the factory and the carburetor is set in

T

compliance with Emission Regulations. In addition, the

 

carburetor is equipped with “H” (High Speed) and “L” (Low

 

Speed) needle adjustment limiters that prevent settings

 

outside acceptable limits.

L H

Engine Break-In

 

New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor adjustments can be made. During the break-in period your engine performance

will increase and exhaust emissions will stabilize. Idle speed can be adjusted as required.

High Altitude Operation

This engine has been factory adjusted to maintain satisfactory starting, emission, and durability performance up to 1,100 feet above sea level (ASL) (96.0 kPa). To maintain proper engine operation and emission compliance above 1,100 feet ASL the carburetor may need to be adjusted by an authorized ECHO service dealer.

If the engine is adjusted for operation above 1,100 feet ASL, the carburetor must be re-adjusted when operating the engine below 1,100 feet ASL, otherwise severe engine damage may result.

1.Before adjusting carburetor clean or replace air filter and muffler “Spark Arrestor Screen”.

2.Make sure the bar and chain are properly adjusted.

3.Start engine and run several minutes to bring to operating temperature. Flash choke twice during warm-up to clear any air from the fuel system.

4.Stop engine. Turn “H” speed needle counterclockwise (CCW) to stop. Turn “L” speed needle midway between full clockwise (CW) stop and CCW stop.

5.Idle Speed Adjustment:

•Start engine, turn “Idle” speed adjustment screw “T” CW until the saw chain begins to move, then turn screw out CCW until the saw chain stops moving. Turn screw out, CCW, an additional 1/4 turn.

When carburetor adjustment is completed, the saw chain should not move at idle, otherwise serious personal injury may result.

6.Accelerate to full throttle for 2 - 3 seconds to clear any excess fuel in the engine, then return to idle. Accelerate engine to full throttle to check for smooth transition from idle to high speed. If engine hesitates turn “L” needle CCW 1/8 turn and repeat acceleration. Continue adjustment until smooth acceleration results.

7.Check idle speed and reset if necessary as described in item 5. If a tachometer is available idle speed should be set to value listed on technical data page.

When starting, idling adjustment speed should be adjusted to prevent the saw chain from moving. When you experience trouble with the carburetor, contact your dealer.

28

X7503197605

© 01/2014 ECHO Inc.

Page 27 Page 29
Page 28
Image 28
Echo CS-450P instruction manual Carburetor Adjustment, Engine Break-In
Page 27 Page 29

CS-450P specifications

The Echo CS-450P is a powerful chainsaw designed for demanding tasks in various environments, ideal for both professional landscapers and avid DIY enthusiasts. Known for its durability and performance, this model showcases several outstanding features and technologies that set it apart from other chainsaws in its class.

At the core of the CS-450P is its robust 45.0 cc professional-grade, 2-stroke engine. This engine is engineered to deliver high power output while maintaining excellent fuel efficiency, making it suitable for extensive cutting tasks without the need for frequent refueling. The chainsaw is equipped with a decompression valve that simplifies starting, reducing the necessary pulling force, especially after prolonged storage or in cold conditions.

One of the standout features of the CS-450P is its Power Boost Vortex technology. This innovation enhances air intake, resulting in a more efficient combustion process. As a result, users experience a significant boost in performance, contributing to faster cutting speeds and improved overall efficiency. This system ensures that the chainsaw operates smoothly, even under heavy loading conditions.

The Echo CS-450P is designed for precise and controlled operation. It features a 20-inch bar and chain, providing an effective balance between reach and maneuverability. The sharp, low-vibration chain ensures smooth cutting action, reducing wear and enhancing safety during use. Additionally, the ergonomic handle design minimizes fatigue, allowing users to operate for extended periods with comfort.

Another significant aspect of the CS-450P is its anti-vibration technology. This feature helps absorb shock during operation, which not only enhances comfort but also promotes better control over the saw, especially during prolonged use. This is particularly beneficial for professional users who may be operating the chainsaw for hours at a time.

For user convenience, the CS-450P includes a convenient tool-less air filter cover, making maintenance easier and quicker. This accessibility encourages regular cleaning and upkeep, which ultimately prolongs the life of the chainsaw. It also features an automatic oiling system, ensuring that the chain remains lubricated during operation, thereby enhancing cutting efficiency and reducing wear on the bar and chain.

Overall, the Echo CS-450P is a well-equipped chainsaw, featuring advanced technology and thoughtful design elements that cater to the needs of users in various cutting scenarios. Its combination of power, efficiency, and user-friendly features makes it an excellent choice for those seeking reliable performance in a professional-grade chainsaw.
Top Page Image Contents