Chain brake
Ignition switch | Decompression device |
Start / Run
Choke
Throttle trigger lockout
Throttle trigger
Starter handle
Unlock chain brake
WHEN THE ENGINE IS COLD
CAUTION
Make sure the bar and chain are free from any obstruction when starting the chain saw.
ss
ss&ILL THE FUELHTANK WITHEFUEL MIXTURE
It is not permitted to fill fuel above the shoulder level of fuel tank.
ss&ILL THE CHAIN OIL TANKAWITH LUBRICANTT
Do not over fill.
ss
ss0ULL CHOKE CONTROL KNOBCALLNTHERWAYLOUT
(Choke position )
ss3ECURELY HOLDLTHE CHAINLSAW AS SHOWN AND pull starter handle several times until first firing sound.
ss 0USH CHOKE CONTROL KNOBCALLNTHERWAYLINK
ss0RESSETHESDECOMPRESSIONEDEVICE AND PULLSSTARTER handle again to start the engine.
ss7HEN ENGINEESTARTSNIMMEDIATELYRSQUEEZE ANDM release throttle trigger for disengaging throttle latch and returning engine to idle, and pull front hand guard towards the operator immediately. (Chain brake unlocked position)
Chain brake
Ignition switch | Decompression device |
Start / Run
Starter handle
Unlock chain brake
WHEN THE ENGINE IS WARM
CAUTION
Make sure the bar and chain are free from any obstruction when starting the chain saw.
ss
ss #ONlRM THERE ISTFUEL AND CHAIN OIL INETHE TANKS ss
ss 0RESSETHESDECOMPRESSIONEDEVICEP
ss3ECURELY HOLDLTHE CHAINLSAW AS SHOWN AND PULLN starter handle.
ss#HOKEOMAYEBE USEDYIF NECESSARYEBUT AFTER lRST
firing sound, pull throttle trigger to release choke.
ss!FTERTSTARTING THE ENGINE PULLTFRONT HAND GUARD towards the operator immediately.
(Chain brake unlocked position)
15 |