Echo ED-200 manual Maintenance, AIR Filter, Fuel Filter, Spark Plug

Models: ED-200

1 16
Download 16 pages 41.96 Kb
Page 13
Image 13

MAINTENANCE

Air filter

AIR FILTER

Clean before Use.

-Remove air cleaner cover and pull out air filter.

-Lightly brush off dust or wash it in water and detergent.

-Dry completely before putting it back in place.

Air cleaner cover

Fuel filter

Fuel tank cap

FUEL FILTER

Check periodically.

-Do not allow dust to enter into fuel tank.

-Clogged filter will cause difficulty in starting engine or poor engine performances.

-Pick up fuel filter through fuel inlet port with a piece of steel wire or the like.

-When filter is dirty, replace it.

0.6 - 0.7 mm (0.024 - 0.028 in)

SPARK PLUG

Check periodically.

-The standard spark gap is 0.6 to 0.7 mm (0.024 to 0.028 in.).

-Correct spark gap if it is wider or narrower than the standard gap.

-If the electrodes are coated with carbon deposits replace with a new spark plug. Do not sandblast to clean.

Remaining sand will damage engine.

Fastening torque = 15 to 17 Nm

(130 to 145 inlb)

IMPORTANT

Do not over tighten plug.

11

Page 13
Image 13
Echo ED-200 manual Maintenance, AIR Filter, Fuel Filter, Spark Plug