MAINTENANCE

 

AIR FILTER

 

• Clean before use.

 

- Remove air cleaner cover and pull out air

 

filter.

 

- Lightly brush off dust or wash it in water and

 

detergent.

Air filter

- Dry completely before putting it back in

place.

 

Air cleaner cover

FUEL FILTER

Check periodically.

-Do not allow dust to enter into fuel tank.

-Clogged filter will cause difficulty in starting engine or poor engine performances.

-Pick up fuel filter through fuel inlet port with

a piece of steel wire or the like.

Fuel filter- When filter is dirty, replace it. Fuel tank cap

0.6 - 0.7 mm

CHECK FUEL SYSTEM

Check before every use.

After refueling, make sure fuel does not leak or exude from around fuel pipe, fuel grommet or fuel tank cap.

In case of fuel leakage or exudation there is a danger of fire. Stop using the machine immediately and request your dealer to inspect or replace.

SPARK PLUG

Check periodically.

-The standard spark gap is 0.6 to 0.7 mm.

-Correct spark gap if it is wider or narrower than the standard gap.

-If the electrodes are coated with carbon deposits replace with a new spark plug. Do not sandblast to clean.

Remaining sand will damage engine.

Fastening torque = 15 to 17 N · m

IMPORTANT

Do not over tighten plug.

13