16

EQUIPMENT CHECK

Before operation a complete check of the unit must be performed;

Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed.

Inspect fuel lines, tank and area around carburetor for fuel lieaks. DO NOT operate unit if leaks are found.

Inspect shield for damage and ensure that the cut-off knife is securely in place. Replace if either is damaged or missing.

Check that the cutting attachment is firmly attached and in safe operating condition.

Check that front (loop) handle and shoulder strap/ or shoulder/waist harness are adjusted for safe, comfortable operation. See Assembly for proper adjustment.

Have repairs done only by an authorized ECHO Service Dealer.

Do not use any attachment, accessory or replacement part unless it is recommended in the Operator's Manual.

DETERMINE OPERATION AREA

Review the area to be trimmed. Look for hazards that could contribute to unsafe conditions.

15 m (50 ft.)

Spectators and fellow workers must be warned, and children and animals prevented from coming nearer than 15 m (50 ft.) while the trimmer is in use.