18
IMPORTANT
DO NOT use a metal scraper to remove dirt from the cylinder fins.
3.Use the wooden stick or brush to remove dirt from the cylinder fins.
4.Remove grass and leaves from the grid between the starter and fuel tank.
5.When installing the cover, be certain the tab of the metal deflector shield is in the slot of the cover.
EXHAUST SYSTEM
Spark Arrestor Screen
Level 2.
Tools Required: Cross Head Screwdriver. Soft metal brush.
Parts Required: Screen P/N 14586240630, Gasket Lid P/N 14586642031
WARNING 
DANGER
During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal injury may result.
1.Remove spark arrestor screen cover (A), screen holder (B), gasket
(C) and screen (D) from muffler body.
2.Clean carbon deposits from screen (D) and muffler components.
3.Replace screen if it is cracked, plugged or has holes burned through.
4.Assemble components in reverse order.
C
DB
A